| View previous topic :: View next topic |
| Author |
Message |
geekcorerob
Joined: 15 Apr 2004 Posts: 15
|
Posted: Fri Apr 23, 2004 7:58 am Post subject: ps2 memory card specs |
|
|
im looking for some info on mem cards to copy data to and from my pc from my lpt port. i can all ready do this with ps1 cards.
that leads me to belive thers a way to do it with ps2 cards. i found this http://www.modchipman.com/catalog/product_info.php?products_id=78 but i think it will be much more fun to build my self. :D |
|
| Back to top |
|
 |
mrbrown
Joined: 17 Jan 2004 Posts: 1536
|
Posted: Fri Apr 23, 2004 8:24 am Post subject: |
|
|
The item you pointed to is a cable - the memory card adapter itself is seperate and is not trivial to build. I doubt there is any public information to build a PS2 memcard adapter. You'll find that PS2 memcards are different enough from PS1 memcards where adapters that could handle the PS1 cards will not handle the PS2 cards.
IMO, you're better off just buying an exsiting PS2 memory card adapter. |
|
| Back to top |
|
 |
geekcorerob
Joined: 15 Apr 2004 Posts: 15
|
Posted: Fri Apr 23, 2004 8:36 am Post subject: |
|
|
thats what i was afrade of :?
my current goal is the BADATA-SYSTEM.npo file on a ps1 memcard but none of the software that i have and found will soport that.
any ideals? or if any one has the ablity to put the file on a ps1 mem card
and can creat a image of the card could please e-mail me a image?
thanks
Last edited by geekcorerob on Sat May 08, 2004 12:27 pm; edited 1 time in total |
|
| Back to top |
|
 |
mrbrown
Joined: 17 Jan 2004 Posts: 1536
|
Posted: Fri Apr 23, 2004 9:15 am Post subject: |
|
|
| You can't put BADATA-SYSTEM on a PS1 memory card because the exploit only works with PS2 memory cards. |
|
| Back to top |
|
 |
geekcorerob
Joined: 15 Apr 2004 Posts: 15
|
Posted: Fri Apr 23, 2004 9:27 am Post subject: |
|
|
| i just whant a ps1 mem card image becasue i can wright ps1 images to a card from my computer then take that to my ps2 and copy it to a ps2 card |
|
| Back to top |
|
 |
mrbrown
Joined: 17 Jan 2004 Posts: 1536
|
Posted: Fri Apr 23, 2004 10:06 am Post subject: |
|
|
| You could copy a save from a PS1 memcard to a PS2 memcard, sure, but there's no way to copy BADATA-SYSTEM from a PS1 memcard to a PS2 memcard using the browser. You would have to write a custom program to do it. |
|
| Back to top |
|
 |
geekcorerob
Joined: 15 Apr 2004 Posts: 15
|
Posted: Fri Apr 23, 2004 10:11 am Post subject: |
|
|
well looks like my experments are over till i get the right tools or learn how to program #2 is highly unlikely.
if some one does have a image im still willing to try.
thanks mrbrown |
|
| Back to top |
|
 |
splynncryth
Joined: 01 Apr 2005 Posts: 16
|
Posted: Fri Apr 01, 2005 3:19 pm Post subject: |
|
|
I'll plea for specs on the PS2 mem card as well. I do know that on the PS1, the controllers and mem cards shared the same bus with the exception of a few control lines to select a specific device. Is the same true of the PS2? If so, then maybe I can throw a logic analizer into the mix assuming I can find the stuff to to make a breakout to move the card externally to where I can get a probe on it. But that is no guarentee I'll understand everything right off. If anyone has blazed a trial befor me, I'd appricate it.
As for the commercial solutions, so far I haven't seen anything that lets me have complete control and access to the raw data. Furthermore, I'm pretty sure I can build a memory card for quite a bit less that $25-30. (8 meg NAND flash ICs are pretty cheap)
As for the difficulty, I have a piece of paper that says I'm crazy enough to try. :) |
|
| Back to top |
|
 |
|