| View previous topic :: View next topic |
| Author |
Message |
Orpheus
Joined: 01 Dec 2005
Posts: 2
|
 Posted: Thu Dec 01, 2005 2:43 am Post subject: I'm having trouble to connect with PS2Link |
 |
|
I'm using PS2Exec as client, and PS2Link as loader, it's is all configured right, is need something that i don't know to link?
When I execute the PS2Execute, says: Waiting for PS2 connextion, some special Lan cable is needed? |
|
| Back to top |
|
 |
sluggybug1
Joined: 14 Nov 2005
Posts: 8
|
| Posted: Sun Dec 04, 2005 12:28 pm Post subject: |
|
|
| i recommend using xlink is available from here. Also be sure to edit the IPCONFIG.DAT to ps2ip netmask pcip. (make sure ipconfig.dat is all uppercase as well). If you dont have a switch or modern router (they sense is a cables straihgt through or cross over) you will need a cross over cable same as you would from pc to pc hope this helps :). |
|
| Back to top |
|
|
Orpheus
Joined: 01 Dec 2005
Posts: 2
|
| Posted: Mon Dec 05, 2005 5:38 am Post subject: |
|
|
I already use these application and still don't works. Is that cable that i have to use? http://www.johnscloset.net/wiring/xover.gif
The cable I was using it was the cable of my modem... I really don't no any especification... I think it have the same combination of cables on the two sides... |
|
| Back to top |
|
|
Hoaxer
Joined: 05 Dec 2005
Posts: 11
Location: Kyiv, Ukraine
|
| Posted: Mon Dec 05, 2005 5:41 am Post subject: |
|
|
| Use simple ethernet pc to pc cable (not pc to hub). The one which connects two PC's into lan... |
|
| Back to top |
|
|
sluggybug1
Joined: 14 Nov 2005
Posts: 8
|
| Posted: Tue Dec 06, 2005 10:21 am Post subject: |
|
|
A cable modem will have a straight through cable it is easy to tell what you have by looking at the rj45 cables. If they are the same colours in the same order its a straight through(if one of them is crossed over it a cross over cable).
The pc to pc cable Hoaxer is telling you about is right and its called a cross over cable.
now just a little note i mae a mistake in the first post about the IPCONFIG.DAT its ps2ip netmask gateway.
You probaly know this but on the pc I would recoment you set a
static ip 192.168.1.1
netmask 255.255.255.0
and on the ps2
ip: 192.168.1.2
netmask 255.255.255.0
gateway 192.168.1.1 |
|
| Back to top |
|
|
Hoaxer
Joined: 05 Dec 2005
Posts: 11
Location: Kyiv, Ukraine
|
| Posted: Thu Dec 08, 2005 4:16 am Post subject: |
|
|
| Quote: | | When I execute the PS2Execute, says: Waiting for PS2 connextion, some special Lan cable is needed? |
I had this when tried to boot PS2Execute on PS2 without ethernet adapter (or modem, how's that called?)
Most probably your LAN settings are wrong. Use what sluggybug1 adviced you. Open your Control Panel->Network Connections->LAN connection->TCP protocol, then select it's properties and there you should type in all that. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
