| View previous topic :: View next topic |
| Author |
Message |
Electro
Joined: 31 Oct 2007
Posts: 3
|
 Posted: Wed Oct 31, 2007 5:08 am Post subject: PSP Remote Port D-Pad MOD! DONE! |
 |
|
How to do it:
What U will need:
PSP Remote
(8) 3in long Wires (Any)
Some old controller circuit board for the D-Pad.
RemaPSP:
http://localhost.geek.nz/remapsp/remapsp1.zip
This can be used to control any of the PSP buttons.
Thanks danzel. ;)
Step 1:
Take the 2 screws out.
Step 2:
Soldered the 8 3in long Wires to each of the buttons U would like. I soldered the wires to the Back, Next, Play and Volume - but U can solder to any of them in any order.
(Except for the hold switch because I don't think it's supported in the RemaPSP app.)
Step 3:
Brake out the left side of the circuit board so it's just the D-Pad contacts.
Step 4:
Solder the 8 wires to the D-Pad circuit board.
So that each wire is soldered to the other side of the contacts like so:
When your done it should look something like this:
 
(Sorry for the bad pics but my camera sucks on close pics.)
Then read the readme in the RemaPSP to find out how to Use it.
(U can allso flash the 2 PRX's that are in the dh/kd folder to your flash0.
I found that to work better.
To do this Put the 2 (prx's nkthread.prx and remapsp.prx) into the kd folder of flash0.
And U will also need to add these 2 lines:
Right after /kd/impose.prx
/kd/nkthread.prx
/kd/remapsp.prx
to the pspbtcnf_game.txt that is also in the kd folder.
NOTE I ONLY TESTED THIS ON 3.40 AND 3.52M33-4!
FLASHING TO ANY OTHER FIRMWARE OVER 3.52M33-4 MAY RESULT IN A BRICK!!!
ALSO THIS ONLY WORKS FOR HOMEBREW AND UMD'S.
And U can use the D-Pad buttons from the controller that U get the circuit board from.
O and as for the case I didn't think of 1 yet.
But U guys can suggest 1. ;)
Cheers.
_________________
Last edited by Electro on Fri Nov 02, 2007 11:04 am; edited 6 times in total |
|
| Back to top |
|
 |
danzel
Joined: 04 Nov 2005
Posts: 182
|
|
| Back to top |
|
|
Electro
Joined: 31 Oct 2007
Posts: 3
|
| Posted: Wed Oct 31, 2007 6:30 am Post subject: |
|
|
Wow sweet thank U! :D
Now I can do this MOD. ;)
_________________
|
|
| Back to top |
|
|
Art
Joined: 09 Nov 2005
Posts: 647
|
| Posted: Wed Oct 31, 2007 10:01 am Post subject: |
|
|
| Quote: |
As many of U know the PSP Remote that U use with your FAT PSP's headphones has 6pins so..
My Idea is this:
I am going too make a joystick that uses those 6pins. |
Unless you can program a microcontroller you will need to destroy a remote to do so,
and don't expect it to be as responsive as the D-pad.
All of the information passed from the remote to the PSP is sent through one wire.
The others have different purposes.
It's not a matter of connecting an old Amiga joystick to those six wires.
PS, already did it with a little game of Pong. Player two can use the
remote forward and reverse buttons as the second joystick ;)
_________________
If not actually, then potentially. |
|
| Back to top |
|
|
Electro
Joined: 31 Oct 2007
Posts: 3
|
| Posted: Wed Oct 31, 2007 11:40 am Post subject: |
|
|
I'm taking my remote apart and will solder a joystick to it.
It already has the controls I need:
From danzel readme:
Controls:
Prev Track: left
Next Track: right
Play: Split/Join.
Valid options for the remote:
r_left r_right (Previous/Next Track)
r_play
r_up r_down (Volume)
;)
_________________
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
